oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 807-sl133.2m-02a 133.2 mhz if saw filter 430 khz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 807-sl133.2m-02a january 2011 rev a 133.2 mhz if saw filter 430 khz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, f, g, h ground i input j input or ground d output e output or ground test fixture & values input l1=408nh, c1 = 27pf output l2=408nh, c2 = 27pf source/load impedance 50 ?
oscilent part number 807-sl133.2m-02a january 2011 rev a 133.2 mhz if saw filter 430 khz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -40 - 85 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single/balanced ended) (1) ? - 50/200 - load impedance (single/balanced ended) (1) ? - 50/200 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. test fixture & values input l1-1=l1-2=280nh, c1 = 10pf output l2-1=l2-2=280nh, c2 = 9pf source/load impedance 200 ?
oscilent part number 807-sl133.2m-02a january 2011 rev a 133.2 mhz if saw filter 430 khz bandwidth product specification p. 3 www.oscilent.com electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 133.2 - insertion loss at fo (including losses in matching circuit) db - 4.5 8.0 group delay variation at fo 100 khz nsec - 300 1000 amplitude ripple variation at fo 100 khz db p-p - 0.50 1.00 temperature coefficient ppm/ c - -0.036 - bandwidth at -3db khz - 430 - relative attenuation fc 250khz ~ fc 400khz dbc 3 5 - fc 400khz ~ fc 600khz dbc 15 16 - fc 600khz ~ fc 800khz dbc 20 28 - fc 800khz ~ fc 3.0mhz dbc 29 31 - fc 3.0mhz ~ fc 7.0mhz dbc 35 42 - fc 7.0mhz ~ fc 30mhz dbc 40 47 - frequency response frequency response ripple & group delay variation fo100 khz
oscilent part number 807-sl133.2m-02a january 2011 rev a 133.2 mhz if saw filter 430 khz bandwidth product specification p. 4 www.oscilent.com relative attenuation smith chart
|